Equipment Function Description
1. The exterior and interior of the body are made of # 304 stainless steel; Good insulation effect.
2. Dual use type: can hold thousand layer shelves and carts;
3. The device is equipped with an electronic frequency converter, which can save 5% -10% of electricity;
4. Install an oil leakage device, which can be regularly removed and cleaned to prevent oil stains from dripping onto the board;
5. Design the baking method with vertical placement;
6. The machine has alarm function and automatic power-off function for overheating.
7. Choose Omron electronic control for stable operation;
8. The heating tube is made of ceramic strip stainless steel material imported from Taiwan and equipped with two heating tubes;
9. The machine is set to 1-stage temperature control, with a separate temperature control meter and timer.
10. Japanese made temperature controller, high-precision PID automatic calculation, paired with SSR interface, low failure rate and precise temperature.
11. Dual over temperature protection system, with one section of over temperature protection set internally by the temperature controller for protection; The second section furnace top overtemperature protection switch is set for protection, and an alarm and abnormal indicator light are displayed to notify on-site personnel for handling.
12. The machine has alarm function and motor overheating protection function.
13. Electricity consumption: The single-sided machine has a power of 20KW and starts at 20 degrees per hour. When the temperature reaches the set temperature, the equipment is in a constant temperature state at only 9 degrees per hour. Under normal operation, the equipment consumes 11 degrees per hour.
14. Each machine is equipped with two intelligent automatic doors.